| | Series | Description |
|---|
 | 1500
| Solid Carbide Drills, Standard Length, Two 30 Deg. RH Spiral Flutes, 135 Degree Notched Cam Point |
|---|
 | 1510
| Solid Carbide Drills, Standard Length, Two 25 Deg. RH Spiral Flutes, 118 Deg Four Facet Point |
|---|
 | 1520
| Solid Carbide Drills, Stub Length, Two 30 Deg. RH Spiral Flutes, 135 Degree Notched Cam Point |
|---|
 | 1525
| Solid Carbide Drills, Stub Length, Two 25 Deg. RH Spiral Flutes, 118 Deg Four Facet Point |
|---|
 | 1530
| Solid Carbide Drills, Flat Drill, 118 Deg. Drill Point |
|---|
 | 1535
| Solid Carbide Drills, Spotting Drill, Two RH Spiral Flutes, 120 Deg Cam Relieved Point |
|---|
 | 1545
| Solid Carbide Drills, Spotting Drill, Two RH Spiral Flutes, 90 Deg Cam Relieved Point |
|---|
 | 1570
| Solid Carbide Drills, Micro Drill, Two Straight Flutes, 135 Deg. Notched Point |
|---|
 | 1590
| Solid Carbide Drills, Circuit Board Drills, Two RH Spiral Flutes, 1/8" Shank, 1-1/2" OAL, 130 Deg. Four Facet Point |
|---|
 | 2305
| Solid Carbide Drills, Drill & Countersink, Double End, Two RH Spiral Flutes, 118 Deg Cam Relieved Drill Point, 60, 82 & 90 Deg. Angles |
|---|
 | 40CT
| Carbide Tipped Drills, Jobber Length, Two RH Flutes, 118 Deg. Cam Relieved Point |
|---|
 | 40HD
| Carbide Tipped Drills, Two Straight Flutes, 118 Deg. Cam Relieved Point |
|---|
 | 40TL
| Carbide Tipped Drills, Taper Length, Two RH Flutes, 118 Deg. Cam Relieved Point |
|---|
| No Image Available | 7500
| Solid Carbide Drills, Drill & Countersink Set, Double End, Two RH Spiral Flutes, 118 Deg Cam Relieved Drill Point |
|---|
